Pedals

Volume Pedals

VP1 Stereo Volume pedal for 'in line' operation. Connect the instruments left and right outputs to the L & R input of the VP1 via 2 x 6.35 mm mono jack plugs. Connect the VP1 left and right output to an amplifier via 2 x 6.35mm mono jack plugs.

Overseas customers - please EMAIL ME! 

VP2 Mono Volume pedal for 'in line' operation. Connect the instruments output to the VP1 input via a 6.35 mm mono jack plug. Connect the VP2 output to an amplifier via a 6.35mm mono jack plug.

Overseas customers - please EMAIL ME! 

VP3 Stereo Volume pedal for 'direct' operation. Connect to the instruments volume pedal socket via an attached cable fitted with a 6.35mm stereo jack plug.

Overseas customers - please EMAIL ME! 

VP4 Stereo Volume pedal for 'direct' operation on Technics keyboards. Operates as a swell or expression pedal rather than a volume pedal by virtue that the volume is low but not zero at closed position. Connect to the instruments volume pedal socket via an attached cable fitted with a 6.35mm stereo jack plug.

Overseas customers - please EMAIL ME! 

VP5 Stereo Volume pedal for 'direct' operation on Ketron and Solton. Connect to the instruments volume pedal socket via an attached cable fitted with a 6.35mm stereo jack plug.

Overseas customers - please EMAIL ME! 

VP7 Stereo Volume pedal for 'direct' operation on Yamaha and Korg keyboards. Connect to the instruments volume pedal socket via an attached cable fitted with a 6.35mm stereo jack plug.

Overseas customers - please EMAIL ME! 

Foot Switches

Foot switches fall into two categories: Latching and Momentary action. The difference is that a Latching pedal is pressed ON, then pressed again for OFF. A momentary pedal only operates while it is held down. A typical application for a momentary action pedal would be sustain on a keyboard. To confuse this issue, some modern equipment is fitted with an electronic latch and so use a momentary action pedal to turn the device on and off. In this case a latching pedal would require two press to turn on and two more to turn off. If this happens to you, change the pedal to a momentary action type.

When using momentary action pedals be aware that some have their switch contacts closed when not pressed while other types have the contacts open. You need to get a type that suits your keyboard otherwise the effect works in reverse i.e. press the pedal and the sustain goes off instead of on. If in doubt get a type that can work either way by setting a changeover switch. These types are known as "dual polarity" although strictly speaking that is not the correct term for this feature. 

LP1 Latching pedal used for turning effects etc on/off. Budget priced metal construction, fitted with cable and 6.35mm standard jack plug.

Overseas customers - please EMAIL ME! 

EP3 Latching pedal used for turning effects etc on/off. Fitted with cable and 6.35mm standard jack plug.

Overseas customers - please EMAIL ME! 

SPCG Our lowest priced momentary action pedal. Budget quality metal construction with cable fitted with 6.35mm standard jack plug.

Overseas customers - please EMAIL ME! 

SP1 The most popular momentary action pedal. "Dual Polarity" changeover switch makes this pedal operate on any momentary action application. Cable fitted with 6.35mm standard jack plug.

Suitable for use on all makes and models of keyboard, modules, MIDI file players etc. Price £9.99

Overseas customers - please EMAIL ME! 

NT15 A special version of the NT13 fitted with a 15 pin plug for connection to any Solton MS series keyboard or module Price £11.99

Overseas customers - please EMAIL ME! 

SP2 A "Piano Style" momentary action pedal. "Dual Polarity" changeover switch makes this pedal operate on any momentary action application. Cable fitted with 6.35mm standard jack plug.

Suitable for use on all makes and models of keyboard, modules, MIDI file players etc. Price £29.99

Overseas customers - please EMAIL ME! 

Overseas customers - please EMAIL ME! 

DP1 Two NT13 pedals on a steel plate to form a bank. Both have "Dual Polarity" changeover switches and separate cables fitted with 6.35mm standard jack plugs. Could be used for a sustain and damper pedal on a digital piano. Sorry no picture available.

Overseas customers - please EMAIL ME! 

OUR TELEPHONE: 01709 850864 (UK)